Emaux Sand Filter V Series features its 6-way multi-port valve that can provided years of thorough filtration to remove dirt and debris from the pool water. It is also simple to operate and easy to maintain with only periodic Backwashing to flush out trapped debris from the sand to attain optimal product performance at all times.
|Normal Filtration and Vacuuming|
|Cleaning Filter by reversing the flow|
|Used after backwash to flush dirt from valve|
|By-passes filter, used for vacuuming to waste or lowering water level|
|By-passes filter for circulating water to pool|
The filter uses special filter sand to remove dirt particles from pool water. The filter sand is loaded into the filter tank and functions as a permanent dirt removing media. When the control valve is in the FILTER position, the pool water which contains suspended dirt particles, is pumped through your piping system and is automatically directed by the patented filter control valve to the top of the filter tank. As the pool water is pumped through the filter, dirt particles are trapped by the sand bed, and filtered out. The cleaned Pool water is returned from the bottom of the filter tank, through the control valve and back to the pool through the piping system. This entire sequence is continuous and automatic. It provides for total re-circulation of pool water through your filter and piping System.
After a period of time, the accumulated dirt in the filter causes a resistance to flow, and the flow diminishes. This means it is the time to clean your filter. With the control valve in the BACKWASH position, the water flow is automatically
reversed through the filter so that it is directed to the bottom of the tank, up through the sand, flushing the previously
trapped dirt and debris out the waste line.
We have a full range of Pool Heaters, Pool Pumps & Sand Filters.
Filter Area : 0.20 m3
Multi Port Valve : 6 way (Filter, Backwash, Recirculate, Waste, Rinse, Close)
Max Flow Rate : 11.50 m3/H - 190 LPM
Media: Upto 80kg (not included, dependent on type)
Suggested media size: 0.5 - 0.8mm
Max Water Temp : 40oC
Inlet/Outlet: 40mm/1.5" High Pressure PVC
Warranty : 2 Year Valve, 5 Year Tank
|Unit Of Measure||ea|
Not all items available at all locations. Payment is to be made prior to pick up, either by Credit card over the phone or Direct Deposit. (Please note PAYPAL not available for this service.)
All our products are backed by a 1 year onsite and 3-year parts manufacturers warranty as specified on the product page. The specific warranty term for a product can be found under the WARRANTY section of the product specifications. The warranty exceeds the consumer warranties and guarantees under Australian Consumer Law. Warranties are for the Original Owner in the Original location.
We aim to assist promptly and professionally. Your cooperation and patience will help us resolve your issue more quickly. In most instances we can resolve your concern without a site visit; most issues are resolved promptly with customer assistance.
When you call for service, please note that our customer service team cannot send a technician, without first following our “Trouble Shooting and Diagnosis” procedure.
We will require your assistance in the first instance to "Trouble Shoot" (This is to avoid you paying for an unnecessary service call fee charged by the service agent). This may involve sending us photos, adjusting settings, testing and ensuring the unit has been installed and operated with best practice.
Before calling for service, please read all instructions carefully and ensure the item is correctly setup.
Please also ensure you have the following information, have confirmed the following and can provide.
Our customer service team maybe unable to assist you further, if you cannot provide requested information.
The best solution to any product fault depends on the nature of the fault itself, and each fault will be given a solution to best solve your problem.