Emaux ‘s SuperPower series variable speed pump is designed and manufactured to benefit pool owners and will appreciate their power bill. The energy saving pump would widely apply on pool, spa, waterfall, and water features. It provides the best energy saving solution from over-usage and to increase efficiency and reduce maintenance cost.
Traditional single speed pump runs at maximum load continuously, is inefficient and with high running cost compare to Emaux SuperPower Variable Speed Pump. Reduced speeds (rpm) provide a slower water circulation rates that put less strain on the complete installation such as filtration, sanitization and plumbing. It reduces the wear and tear factor and resulting in cost saving to the pool owner.
1. IEEE802.11, 2.4GHz, b/g/n
2. Internal antenna, open area 25m
3. Data throughput 300Mbits
1. RTU over RS-485
2. Support all standard Modbus protocal equipment
3. Isolated AB data bus
4. Max Baud Rate 9600 bps
Cloudy pool water usually indicates lack of filtering and incorrect water balance which is proven dangerous to swimmers. You can avoid any hazards by keeping your swimming pool healthy and free from debris by using our top of the line Emaux SuperPower SPV150.
Emaux SuperPower SPV150 Pool Pump is one of the best ways to maintain a clean water system. It is vital in keeping your pool in top condition by cleaning and filtering debris so you can maximize your swimming experience.
All the pumps are fully tested and certified by SAA to guarantee energy efficient operation and reliable performance.
|Model||SPV150 + WIFI|
|Maximum Lift (Hmax)||20.5m|
|Maximum Flow (Qmax)||416 L/M or 25,000 L/H|
|Voltage||230V / 50Hz|
|Power||1.5 HP or 1300W|
|Rotating Speed||800-3400 r/min|
|Inlet/Outlet||1.5"/40mm & 50mm/2.0" High Pressure PVC included|
|Net dimension (mm)||640mm x 215mm x 340.5mm|
|Net weight||18.5 kg|
|Packing dimension (mm)|
Not all items available at all locations. Payment is to be made prior to pick up, either by Credit card over the phone or Direct Deposit. (Please note PAYPAL not available for this service.)
All our products are backed by a 1 year onsite and 3-year parts manufacturers warranty as specified on the product page. The specific warranty term for a product can be found under the WARRANTY section of the product specifications. The warranty exceeds the consumer warranties and guarantees under Australian Consumer Law. Warranties are for the Original Owner in the Original location.
We aim to assist promptly and professionally. Your cooperation and patience will help us resolve your issue more quickly. In most instances we can resolve your concern without a site visit; most issues are resolved promptly with customer assistance.
When you call for service, please note that our customer service team cannot send a technician, without first following our “Trouble Shooting and Diagnosis” procedure.
We will require your assistance in the first instance to "Trouble Shoot" (This is to avoid you paying for an unnecessary service call fee charged by the service agent). This may involve sending us photos, adjusting settings, testing and ensuring the unit has been installed and operated with best practice.
Before calling for service, please read all instructions carefully and ensure the item is correctly setup.
Please also ensure you have the following information, have confirmed the following and can provide.
Our customer service team maybe unable to assist you further, if you cannot provide requested information.
The best solution to any product fault depends on the nature of the fault itself, and each fault will be given a solution to best solve your problem.