NEW 2018 MODEL - Now with ABS No Rust Exterior Case
& 10 Amp Australian Lead and Plug, just plug into a 10 Amp point.
Recommended for Spas & Pools upto 18,000 Litres or 6 x 2.5 Metres approx*.
(*Subject to pool type, desired use, prevailing weather in your location, see FAQ's for more information)
Best suited to spas and swim spas, consider larger units for pool use.
Have a larger pool or live in a colder climate?
Consider our larger units.
QUESTIONS? Call us
Extend your Swimming Season, Or use your pool all year round*
(*subject to correct sizing)
Save money on heating your pool or spa
Stay fit, have fund and get year round value from your pool investment
Heat your pool to the recommended 28oC degrees with ease!
(SPASA Recommends 24-28 degrees for fun pools and 34-38 degrees C for Spas)
All Swimmax Heat Pumps have been TESTED & CERTIFIED TO AS/NZS 60335
The Australian Standard that deals specifically with Heat Pumps.
Do NOT put your family's safety at risk.
Only purchase a certified Swimmax Heat Pump.
Any heat pump that hasn't been tested by an accredited body and meets the requirements of the Australian Standard is potentially dangerous.
Only sellers who can provide an accredited certificate truly meet the Australian Standard.
Some sellers claim they Meet the Standard, This does not mean TESTED and CERTIFIED.
We use and have certificates from SGS & TUV
Please choose your Pool Heat Pump retailer carefully
You only want to purchase 1 heat pump for your pool, Buy the Best you can.
HOW THEY WORK
Pool heat pumps work exactly the same way as your air conditioner or fridge, they extract the ambient temperature from the surrounding air, even in winter.
This heat is absorbed by the refrigerant gas, compressed and further heated, Then rather than heating the air like an air conditioner,
They heat the water via the Titanium Heat Exchanger Coil and return it to your pool.
The pipe installation can be done by yourself if you are handy, or your local plumber.
With 40mm High Pressure PVC pipe (class 12 - 50mm external) simply have your pool heat pump inlet and outlet connected to your pool filter system outlet and inlet, after your pool pump.
Bypass valves as per diagram in picture gallery are required to balance water flow through the pool heat pump for optimum performance.
Then have an electrician install a Suitable power supply on its own circuit with RCD and turn it on!
ECONOMICAL AND QUIET TO RUN
Pool heat pumps are very efficient, converting the power used and returning five times or more the energy as heat.
This unit returns 5.5KW + in heat output for only 1.0KW of electricity input.(The heat output will rise along with the outside temperature)
Another way of looking at it is, for every $1 of power input you get $5-$6+ of heat!
This compares with resistance heaters, like your spa which may heat an element and return only 1kw of heat for every 1kw of electricity in, or only $1 of heat for every $1 you spend.
Heat pumps are also considerably cheaper to run than electric or gas heating saving you up to 75%, Solar heating tubes on your roof require a lot of plumbing to install, need a pump to run, can be unsightly and NEED THE SUN!You can run your Swimmax Pool Heat Pump 24/7 quietly and economically in the cold and without the sun!
They will work in temperatures from -15 degrees c to + 43 degrees c.This Swimmax Pool Heat Pump is also quiet at 48 DB(a) Just turn it on!
* cost to produce 1 Million BTU of Heat, comparison % & price will vary.
Our certified factory is a major supplier to over 20 countries all over the world.
We use brand name quality compressors from TOSHIBA & PANASONIC
We use Eco Friendly r410a Refrigerant and we are members of Refrigerant Reclaim Australia
Heating Output: 5.5kW / 18800 BTU* Input Power: 1.0 kW* Input Current: 4.5amp* Power Supply: V/PH/Hz - 230/1/50 Heat Exchanger: Titanium Compressor Type: Rotary Compressors: 1 Fans: 1 Noise: 48 dB(A) Water inlet/outlet: 1.5"/40mm Water flow: 2.1m3/H (Your pump will need to flow up to 4000l per hour) Refrigerant: eco friendly r410a
Unit Dimensions: 900mm Long x 340mm Wide x 665mm High Packaging Shipping Dimensions: 1000mm Long x 375mm Wide x 700mm High Weight: Gross Shipping weight 60kg, Net unpacked weight 47kg (*Quoted Specifications at 24oC Air Temp, 28oC Water Temp)
Need advice or a custom solution? CALL US
We have a full range of Pool Heaters in 5.5kW, 9.0kW, 13.5kW, 21.5kW, 40.0kW, 60.0Kw, 90.0kW
We can also custom build Top Mount Solutions if you require to your size needs.